|Home||» Products||» Rusting and Corrosion Damage||» Rusting and Corrosion Damage|
Rusting & Corrosion Damage has been formulated to be used for all types of industrial, commercial, & residential building structures. It is highly appreciated for providing complete protection to TMT bar from corrosion that is being embedded in concrete during construction. This chemical generally comprises citric acid, metal chloride, and a substance that forms a protective layer around applied material. Rusting & Corrosion Damage is known to work by preventing accumulation or reaction of ferric oxide on metal surface by solubilizing rust forming iron with help of chloride ions. Being in liquid state, this chemical compound is easy to apply and shows high effectiveness.
NO RUST - POLYMER
Nature : 3-in-1 water based polymer modified primer for Rust Prevention , Rust Conversion & Rust Protection
Scope : For Rust Proofing / Corrosion Proofing of TMB Bars, Binding Wires, Cut Ends , Welded Points and everything related to rusting and corrosion damage including MS Grills, MS Gates, MS Pillars, MS Plates, MS Joists, MS Sheets etc. with most easy on-site application.
Benefits : Only full proof treatment at lowest cost for protection of TMT Bars.
Coverage : 100 Sq. Ft. ( under controlled conditions )
Application : Direct application (single coat) after surface preparation as per recommended specification.
Product USP : Non-hazardous, low cost, blasting is not required and can be applied upon rusted surface which is intact, single coat required generally and most easy on-site application procedure.
RUST IS GOOD WHERE NO RUST IS USED